Fiber
Works Manufacturing - Sargent, Texas "Just
Ask, We May Do It or Can Get It or Will Build It!"
FIBER-WORKS MFG.
- EST 1998, we provide a variety of service from complete hull refits to scratch
and ding repair. All work is warranted for a minimum of "30 days". We
repair and manufacture using the highest quality materials that can be purchased,
using the newest marine fiberglass technology in our repairs and manufacturing.
Today's marine repair shop has to be a cut above are competition and the ever growing need of the latest greatest need for our customers, not only does the consumers needs change yearly, the FRP industry moves with light speed if your not in it your behind, above is an example of a 1952 Glasstron rebuild, boat was gutted and all composite materials used to replace the wood core. Taking pride in our repairs from a minor chip & ding to a complete refit is what brings our new customers in and our old one's coming back.
We diversify our skills not limiting ourself to just the marine and rebuilding RV's on the occasion.
Our primary service is to the marine industry, we rebuild/refit most makes and model fiberglass boats, whatever the need for that boat we have the skills to bring her back to new our repairs are warranted for a minimum of 30 days, using the best materials that can be purchased is our key to your satisfaction, there are lots of knock off materials out there that can look good as you leave, but cannot make it thru the test of time, we are Matagorda County's only FRP repair shop and we stand behind our service long after are warranty has expired.
"Our goal and experience results in high quality and competitively priced services
for our customers."
Our Repairs Include but are not Limited to:
- Transoms
- Stringers
- Dry Storage Boxes
- Carpet Removed/Replaced
- Control Cables
- Floors/Decks
- Top Cats
- Consoles
- Webbing
- Painting
- Gelcoat
- Cast Decks
- I/O Transom
- One Off Construction
- Electricial Wire
- Non Skid
- Livewells
- Hull & Keel Damage
- Manual/Hydraulic Steering
- Electronics/Troubleshoot
Diversifying is the key to our services, I offer trailer repairs from wheel bearing repack to new axle made on site, we do our best to keep in stock trailer parts, their are so many manufactures of trailers it's hard to keep all the sizes in stock, we keep a lot of McClain boat trailer parts and we can get them shipped in on demand. Roadside assistance in Matagorda County & in your driveway at a premium.
We are a full service Tohatsu and Nissan Outboard Dealer, from tune-up's to power head replacement we can handle all your needs, the NEW TLDI Series direct injection motors are a cut above our competetion with proven technolgy, New outboard motors 2 & 4 stroke, Aurthorized OEM Parts and Service.
We are a full service Tohatsu Outboard service center looking to repower with
one off the finest proven outboards.... give us a call!
Have
you made that decision on a new boat but not the power, and not wanting to put
a heavy load 4 stroke on? Tohatsu outboards are light weight out-of-the-hole 2
stroke power. The new TLDI is it, by some of the most weight concerning consumers
around from racing sail boats to shallow draft fishermen, to some of the commercial
fishermen...."The Tohatsu power is better than a Timex we beat them harder than
any watch and you just can't kill it! "
NISSAN MARINE Outboard Motors
Nissan Marine
4-Strokes Feature an Impressive Full 3-Year Warranty (same as Tohatsu)
TOHATSU MARINE Outboard Motors
Tohatsu four-strokes
also feature an Impressive Full 3-Year Warranty (same as Nissan)
All Tohatsu
and Nissan outboard motors meet or exceed the 2006 EPA standards for all 2-stroke
and 4-stroke outboard motors. Our outboards engines also comply with California
Air Resource Board requirements.
2006 EPA/CARB COMPLIANT
"We are a full service machine shop with the ability to build hard to find and custom parts."
Links of Interest
OBR Parts
We carry replacement power heads remanufactured by www.obrparts.com been rebuilding outboard motors for over 25 years, most insurance companies ask for engine replacement motor's be OBR, full service marine machine shop re manning Mercury/Mariner, Johnson/Evinrude, Yamaha, Mercruiser, Chrysler/Force, all rebuilds receive a 12 month MFG Warranty, OBR also rebuilds gear cases and outdrives, all OBR engines and equipment is hard to distinguish if it's new or rebuilt. When your motor is ready for a rebuild, we will replace it with OBR Parts/Motor
Bobs Machine Shop
Jack plates, low water pick ups, transom shims, we carry a full line of favorite need to have equipment from Bobs machine shop. We install all of Bobs products from jack plates to the sportsmen's low water pick ups, trim motors. www.bobsmachine.com
Outboard Jets
Outboard Jet Pumps are a leader in jet foot technology, turn your flat bottom boat into a true go anywhere machine, jet foots mount up on most 2 & 4 stroke Outboard motors, proven design, stainless steel impellers available for running in saltwater, New jet foots/parts/maintaince www.outboardjets.com
On Site Machine Shop
Not only are carrying fine marine products, I have been building/tooling up a small machine shop, repairing damage shafts, metric and standard threads, seal surfaces, custom nut and bolts, couplers, packing glands, mfg flanges, low water pick ups installed, trailer axle construction, small but growing, cutting carbon steels, stainless, alloys, aluminum, bronze. With a new mig/tig machine on order will be offering repairs to aluminum tops and towers.
Power-Pole
Sport fishing requires the ability to stop your boat and work an area quickly and quietly as you spot or find your fish. With a Power-Pole shallow water anchor you can stop your boat quickly and quietly with the touch of a button and keep your boat securely in place, even in heavy wind and current. A Power-Pole anchor is also eco-friendly and causes no damage to the environment.
For your convenience, we accept:
Fiber Works MFG 10-B Oak Circle Sargent, TX 979-323-9087
Today's marine repair shop has to be a cut above are competition and the ever growing need of the latest greatest need for our customers, not only does the consumers needs change yearly, the FRP industry moves with light speed if your not in it your behind, above is an example of a 1952 Glasstron rebuild, boat was gutted and all composite materials used to replace the wood core. Taking pride in our repairs from a minor chip & ding to a complete refit is what brings our new customers in and our old one's coming back.
