Fiber Works Manufacturing - Sargent, Texas
"Just Ask, We May Do It or Can Get It or Will Build It!"


FIBER-WORKS MFG. - EST 1998, we provide a variety of service from complete hull refits to scratch and ding repair. All work is warranted for a minimum of "30 days". We repair and manufacture using the highest quality materials that can be purchased, using the newest marine fiberglass technology in our repairs and manufacturing.

115hp 90hp 70hp 50hp 40hp 30hp 25hp 18hp 15hp 9.8hp 8hp 6hp 5hp 4hp 3.5hp 2hp


This web site should be viewed at 800 X 600 resolution
Tohatsu MD 115 Features

The TLDI® series are Tohatsu's award winning outboard motors that have an established reputation for being compact in size while demonstrating highly desired features such as low emissions and high fuel economy that are demanded by the new generation of boaters.

They are powered by a direct fuel injection system and a 32 bit ECU (Engine Control Unit). The ECU gives precise fuel injection instructions in accordance to the operating conditions detected by the multiple sensors located on the motor. The TLDI® outboard motors meets all of the 2006 emission regulations stipulated by EPA (Environmental Protection Agency) and CARB (California Air Resources Board).

Individual Sensors
6 individual sensors provide constant vital engine information to the ECU for maximum efficiency.
  
High Output Alternator
The 115 TLDI® is equipped with a high output alternator that produces 37 amps of power even at 1,000 rpm and a whopping 40 amps at wide-open throttle.
  
Noise Reduction System
The exhaust gases and the sound are routed through the labyrinth exhaust. This process reduces the noise level to a minimum when exiting above the water line through the idle port.
  
Engine Control Unit
The 32 bit engine control unit controls the fuel injection and ignition timing for TLDI® outboards.

  
Flushing Port
The 115 TLDI® comes standard with a convenient built-in freshwater flush system. Located on the side of the engine, the flushing port simplifies routine engine flushing.
  
Air Compressor
One of TLDI®'s essential engine components that is the driving force in achieving stabilized fuel injection.
  
Direct fuel Injection
Due to the intrinsic design of the chamber on the cylinder head, the finely atomized fuel mist created by the fuel injector is injected near the spark plug to achieve ideal combustion.
  
Multifunctional Tach.
The tachometer informs the operator of potential problems through the meter indicator and warning lamp.

(Remote models only)

  
Pistons dedicated to TLDI
Teflon coated pistons (equipped on MD 70/90/115) with a concave shape to the head were specifically designed for TLDI® and significantly increase the fuel combustion efficiency.
  
3 StepTrolling Control
The idling speed can be set to any of the three rpm ranges, 700, 800 or 900, by adjusting it on your key switch. This feature allows you to select the ideal trolling speed for maneuvering during a variety of current and wind conditions.

Easy maintenance
The TLDI® outboard motors are designed to be simple and have fewer components that need maintenance or service. TLDI®'s do not require oil filter replacements or valve adjustments as compared with four-stroke outboards.


 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 



For your convenience, we accept:




Fiber Works MFG
10-B Oak Circle
Sargent, TX
979-323-9087
Contact US


Back to Home Page